Philips 55P9161 Quick Start Manual

Projection Television and Remote Control
A
NTENNA OR
BEGIN
C TV
ABLE
1
A and B
A ( ) A & B I
NT ENNA NPUTS
common signal source and an
Y our TV has two sepa-
optional Signal Splitter):
rate ANT(enna)/Cable
If your Antenna or Cable TV
inputs on the rear of the
signal has a round cable con-
set. These two signal
nector (75 ohm) on the end,
inputs offer convenient then you're ready to connect it
hook-up options for both to the 75ohm Signal Splitter.
If your antenna has flat twin-
normal TV program view-
lead wire (300 ohm), you first
ing and Picture-In-Picture
need to attach the antenna wires
(PIP) features.
to the screws on a 300 to 75
The ANT(enna) A input is
ohm adapter before connecting
intended for use and view-
to the 75ohm Signal Splitter.
ing on the TV's main
screen. Your home's pri-
mary Antenna, or Cable
TV signal, should be con-
nected to this input for
normal TV setup, use and
feature operation.
The ANT(enna) B input is
a second, or auxiliary sig-
nal source, designed to
supply your TV's Picture-
In-Picture (PIP) feature.
For many homes the use of
a single existing Antenna
(or Cable TV) source, for
both ANT A and B, will be
the preferred method of
connection. This type of
connection (optional
Signal Splitter required)
will work properly for the
TV's Main on-screen fea-
tures, as well as retain all
the features designed for
PIP. For more details refer
to the Picture-In-Picture
section in your other
owner's manual.
C B
ABLE OX
C C B
ABLE ONVERTER OXES
F or homes with Cable
TV Converter
Descrambler Boxes (with
Premium/Movie Channels
Cable TV Company
scrambled), follow the
steps to the right for an
alternative ANT A and
BEGIN
ANT B PIP feature
1
hookup. Note the Cable TV
TV signal
signal will be split before
INPUT plug on a two-way
connection to the
Signal Splitter (optional).
Converter box (an option-
al two-way 75 ohm Signal
Splitter will be required).
All manuals and user guides at all-guides.com
S -U
ET
Getting Started
Warning/Precautions ..................................1
Hooking Up Your TV ................................1
How to Use the First Time Set-Up Control ..............2
Basic TV and Remote Control Operation .................3
How to Use the On-Screen Menu Controls...............4
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
2
Connect your Antenna or
A typical ANT(enna)
Cable TV signal to the single
connection (using a
75 ohm input plug on the two-
way Signal Splitter (optional).
Then connect two lengths of RF
Coaxial Cable to the two Output
plugs on the two-way Signal
Splitter (F-type connector on
both ends).
Combination VHF/UHF Antenna
300 to 75Ω Adapter
(483521827003)
Twin Lead
Wire
OR
- Outdoor or Indoor Antenna -
receives normal broadcast channels
2-13 (VHF) and 14-69 (UHF).
Round Cable
75Ω Ohm
1
OR
OPTIONAL TWO-WAY
SIGNAL SPLITTER
(single 75ohm Input to twin
75 ohm Outputs - optional
RF Coaxial connecting
cables also required)
Cable TV Signal
Round Cable
75Ω Ohm
Cable TV Company
• The signal routed to the TV's ANT A input will allow for
Premium/Movie channels to be viewable on the TV.
• Channel selection will be at the Converter.
• The ANT A input channel on the TV should be set to the same
output channel as the Converter box (usually CH3 or 4).
OPTIONAL TWO-WAY
SIGNAL SPLITTER
2
Connect one end of RF
Connect your Cable
Coaxial Cable to each of the
to the single 75 ohm
OUTPUT plugs on the 75 ohm
Signal Splitter. The two lengths
of RF Coaxial Cable need F-
type connectors (screw-on or
push type) for both ends.
1 - 3135 015 15511
Q
P AND UICK
T C
ABLE OF ONTENTS
• For details on product registration, warranty,
and service refer to the other literature included
with your TV information packet.
Please retain all these materials and keep them
handy for future reference.
NOTE: This owner's manual is used with several different
television models. Not all features (and drawings) dis-
cussed in this manual will necessarily match those found
with your television set. This is normal and does not
require you contacting your dealer or requesting service.
3
Connect the twin Output
plugs on the Signal Splitter to
the ANT A and ANT B inputs
on the rear of the TV. Push the
round connector end of the RF
Coaxial Cable onto the
ANT(enna) plug and screw it
down tight (if using threaded
cables).
Back of TV
REAR SURROUND SPEAKERS
Y
P B
P R
+ – – +
R L
SUBWOOFER S-VIDEO
FIXED VIDEO
VIDEO OUT
VAR L
AUDIO
PIP R
R L
AUDIO OUT INPUTS
ANT A/CABLE ANT B/CABLE
75 UHF/VHF
75
2
FIXED
VIDEO OUT
VAR
PIP
R L
AUDIO OUT
ANT A/CABLE
75 UHF/VHF
ANT(enna) A
Input
Note: Proper operation of your TV is not dependent upon
connection of the ANT B input. Its main purpose is to provide
an easily connected, dedicated picture source for PIP feature
use. Other signal source options (such as a satellite dish sys-
tem, additional external antenna, VCR, or Video Game) could
also be connected and displayed on the TV screen through the
use of the ANT B input.
Note: Although the ANT B input can be used and swapped
as the source for the TV's Main picture, certain setup fea-
tures (such as Smart Clock) are only based on a signal being
detected at the ANT A input. To ensure that all features are
operating properly, you may not want to rely solely on the ANT
B input as your TV's Main screen signal source.
Connect to ANT A Input
Cable TV Converter
Box Connection
3
Connect one of the Signal
Splitter OUTPUTs to the
INput terminal on the Cable
TV Converter Box. Then route
another connection from the
Cable Converter OUTput ter-
minal to the ANT A Input on
the rear of the TV.
U G
SE UIDE
S
MART
H
ELP
Remember,
be sure to set the
TV for the type sig-
nal you've connect-
ed (see "SETUP"
on page 2 of this
Guide.)
Your TV can set
STOP
itself to select only
the channel numbers
on your Cable sys-
tem (see "Setup"
page 2). If you use a
Cable Converter box,
set the TV to the
same channel as the
converter's CH 3/4
switch (on the rear of
the converter.)
To order any
optional accessory
contact your dealer
or call the toll-free
accessory ordering
AUX 1 AUX 2
PIP
UHF/VHF
number (1-800-851-
3
8885):
• Two Way Splitter
VIDEO
(M61000)
L
AUDIO
R
• 300-75 ohm
AUX 1 AUX 2
INPUTS
Adapter
PIP
ANT B/CABLE
75 UHF/VHF
(M61020)
• UHF/VHF
ANT(enna) B
Input Antenna
Combiner
(SBV111133A01)
Connect to ANT B Input
• The signal routed to the TV's ANT B input will allow for
the selection and viewing of Cable channels at the TV
(except for the scrambled Premium/Movie channels).
4
Connect the remaining
Signal Splitter OUTPUT
from the Splitter to the ANT
B Input on the rear of the TV.
STOP