Sound Menu; Active Control - Philips 30PF9975/69 User Manual

Active Control

The TV continuously measures and corrects all
incoming signals in order to provide the best
picture possible.
& Press the h key on the remote control.
é
The Active Control menu appears.
"
Press the cursor up/down to select the Active
Control values Off
(recommended) or
The picture settings are being optimised
continuously and automatically which is
displayed by bars.The menu items can not be
selected.
'
Press the cursor right to select
.
Picture
(
Press the cursor up/down to select one of the
predefined picture settings.
Sound
Sound
TV
Smart sound
Equalizer
Volume
Balance
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Digital/Analogue)
(3D effect)
AVL
Delta volume
, Minimum , Medium
.
Maximum
Smart
&
Press the cursor right to select
é
Select the menu items in the Sound menu with the cursor
up/down and adjust the settings with the cursor
left/right.Remember, control settings are at normal mid-range
levels when the bar scale is centred.
Smart sound
Select Smart sound to display a list of predefined sound settings,
each corresponding with specific factory settings of Treble and
Bass.
sound in the sound menu.
Notes:
- Dual X is only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo
transmission.
- Digital/Analogue is only selectable in case of digital transmission.
§
Press the cursor right to select
.
Display
è
Press the cursor up/down to select
one of the Dual screen demos or
When you select Dynamic contrast, Pixel Plus,
Digital Noise Reduction or Digital Natural
Motion, the TV screen is divided into two parts:
in the left part the selected picture quality
setting is switched off; in the right part it is
switched on.
Note: Dependent on the input signal, one or more
Dual screen demos may not be selectable.
! Press the h key again to switch off the Active
Control menu.
refers to the personal preference settings of
Personal
Active
Off
.
Sound
,
Show bars
.
11