Cisco 7513 Series Manual page 16

Replacing or Upgrading the Chassis
Figure 7
Step 4
Step 5
This completes the procedure for moving the chassis into the rack.
16 Cisco 7513 and Cisco 7576 Chassis Replacement and Upgrade Instructions
Sliding the Chassis into the Rack (Shown with Card Cage Assembly and
Blower Installed)
POWE R
A
Slide the chassis back into the rack along the ledges until the ears meet the front mounting
posts on both sides of the rack. (See Figure 7.)
Secure each ear to the rack-mounting post with two 10-32 x 5/8-inch, phillips pan-head
screws.
POWE R
B