Remington Rx5 Ultimate Series Use & Care Manual page 10

CLEANING YOUR SHAVER
1.
After every use, hold the shaver over the bin and remove the top of the
cutting head. Remove the head by gripping in the areas between the
four outer cutters and pulling up and away from the handle. (Diagram
A)
2.
Tap the excess clippings that have been collected inside the hair
pocket into the bin. (Diagram B)
3.
Rinse the cutting head thoroughly by running water through the
cutters from both sides of the head.
4.
Rinse the hair pocket under running water.
5.
Leave the cutting head detached and let it air dry. Reattach the
shaving head when dry and you are ready for the next use.
(Diagram C)
6.
Lubricate the cutters on the inside surface once a week using
Remington Shaver Saver (SP4) to maximise performance.
A B
10
C