Table of Contents
Advertisement
T6460/550/552EZ(EN)_EST.qx3
2. Important notes for operation
Switching on
You can switch on the TV-Video Combi with
.
STANDBY/ON y y
If you press
PLAY B-K
,
PROG P+
PROG P–
while the set is in Stand-by, the power will
0..9
be automatically turned on.
Note that the keys
0..9
about 5 seconds just after having switched the
TV-Video combi off.
Power outage/no power
Channel information remains saved for up to 1
year, the time and timer information is saved for
up to 1 minute.
3. Installing your TV-Video Combi
Preparation for use
This chapter shows you how to prepare your TV-
Video Combi for use. The TV-Video Combi auto-
matically seeks out and stores all available TV
channels.
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
1.
1.
Select the desired language for the on-screen
menu by pressing
2.
2.
Press
.
MENU
3.
3.
Confirm with
P+
The automatic TV channel search starts.
PLEASE WAIT
START
The TV-Video Combi does not find any TV
channels during the search
• Check the cable connection of the aerial (aer-
ial socket) and TV-Video Combi.
04.1.28
4:15 PM
,
,
STOP C-L
,
or
FWD 1- B
REW0- s
will be inactive for
or
.
PLAY B-K
STOP C-L
.
FINISH
Page 5
Navigation in the screen menu
You can check/change many functions and set-
tings of your TV-Video Combi via the on-screen
menu. The individual functions are selected, via
the remote control as follows:
Call up the menu: with
MENU
SELECT K L CHOOSE B
TIMER
PICTURE CONTROL
RECORD SET UP
VCR SET UP
TUNER SET UP
GENERAL SET UP
END=EXIT
To select: with
PLAY B-K
To enter or change your selection: with the
number buttons
,
PLAY B-K
0..9
To save or confirm: with
To cancel: with
.
CLEAR
To end: with
STATUS/EXIT
• The TV-Video Combi searches the entire fre-
quency range in order to find and save the
largest possible number of TV channels. It is
possible that the TV channels in your country
are broadcast in a higher frequency range. As
soon as this range is reached during the search,
the TV-Video Combi will find the TV channels.
4.
4.
The clock setting display appears on the TV
screen.
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
[14PV235/ 21PV385]
5.
5.
Set the time with the number buttons
6.
6.
Set 'DAY', 'MONTH' and 'YEAR' with the num-
ber buttons
.
0..9
7.
7.
When all information is correct, save by
pressing
STATUS/EXIT
The preparation for use is now complete.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
5
.
or
.
STOP C-L
or
.
STOP C-L
.
FWD 1- B
.
.
0..9
.
EN
Advertisement
Table of Contents
