Download Print this page

Advertisement

Quick Links

Product features and decoration may vary from photos shown.
Keep these instructions for future reference as they contain
important information.
IMPORTANT! It is a good practice to start training children very
young regarding the importance of helmet use. When children are
older and riding bicycles and faster vehicles, it is important that
they use a helmet each and every time they ride. For this reason,
even while riding a tricycle, it is a good idea to familiarize your
child with helmet use, so that it becomes a habit for life. Choose a
helmet that complies with requirements of the applicable certifying
agency for bicycle helmets. In the United States, choose a helmet
that complies with requirements of the U.S. Consumer Product
Safety Commission (CPSC) Standard 16 CFR 1203. Outside the
U.S., choose a helmet that complies with the requirements of the
applicable certifying agency for bicycle helmets.
fisher-price.com
1
Periodically inspect this product for wear or damage. Check the
plastic parts and if broken or cracked, dispose of them properly.
Replace worn or broken parts immediately.
Periodically check all fasteners regularly to be sure they are tight.
If the fasteners are not tight, tighten them as necessary.
To clean, use a mild soap and water solution and a clean cloth.
Rinse clean with water to remove soap residue.
Adult assembly is required.
Tools required for assembly: Phillips screwdriver, hammer and
scrap block of wood (not included).
Age: 2-5 years
Weight limit: 25 kg (55 lb).
Choose areas for riding that are free of obstacles.
Learn to stop safely.
Use with caution as this product requires skill to operate safely
to avoid falls, collisions, and injuries to yourself (the rider)
and others.
FVB14

Advertisement

loading

Summary of Contents for Fisher-Price FVB14

  • Page 1 FVB14 Product features and decoration may vary from photos shown. • • Keep these instructions for future reference as they contain Periodically inspect this product for wear or damage. Check the important information. plastic parts and if broken or cracked, dispose of them properly.
  • Page 2: Consumer Assistance

    CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470. Outside the United States: Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com. Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
  • Page 3 Parts • Tighten assembled screws with a Phillips screwdriver. Do not over-tighten the screws. WARNING • Please save all packaging material until assembly is complete to ensure that no parts are discarded. Please wipe each part with TO AVOID SERIOUS INJURY: a clean, dry cloth before assembly.
  • Page 4 Assembly WARNING Adult assembly required. Choking hazard to children • under the age of 3 years – contains small parts prior to assembly. Rear Axle Assembly Seat • Turn the frame so that the bottom side is facing you. • Insert the rear axle assembly through the holes in the rear of Frame the frame.
  • Page 5 Assembly Fork Arms Front Wheel Assembly Groove Wheel Cap Pedal Axle Fork Cover • Turn the assembly upright. • Place the front wheel assembly between the fork arms. Make • Fit and “snap” the tabs on a wheel cap into the slots in the hub. sure the pedal axle fits into the groove at the bottom of each Repeat this procedure to attach the remaining wheel cap to the fork arm.
  • Page 6: Label Decoration

    Assembly Label Decoration Handlebar Front • Make sure the areas where the labels will be applied are clean and dry. Wipe your product with a clean, soft, dry cloth to remove any dust or oils. • Refer to the photos located on the package flaps to apply the labels.