Turn the TV on
<
Press the power switch B at the right side of the TV.
> An indicator on the front of the TV lights up.
<
Press the
+CH/PAGE-
on the remote control.
Note: the first time (and only the first time) you turn on your
TV, you see a Welcome screen followed by the installation
procedure. See First time installation below.
First time installation
1. After an introduction screen, you are asked to select a
language of the TV's on-screen-menus. (The text of the
header and the info on screen continuously change
language.)
2. Press the cursor up/down to highlight your language.
3. Press the
button.
OK
4. Follow the on-screen instructions to proceed.
Notes:
- Once you completed the initial installation procedure you
can access the screens from the Settings menu. See p. 23.
- If the TV has already been installed before and/or you want
to change the First time installation settings, proceed with
How to navigate through the menus, p. 12.
button or the
POWER
B button
11