To Select Connected Equipment - Philips Cineos 29PT9020/12 User Manual

Stereo amplifier and two extra front speakers

To select connected equipment

Press the v key on the remote control repeatedly to select
to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
* Only available on certain versions.
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can
be operated with the remote control via the
Recorder or DVD menu on screen.
Recorder
Ò p
Rwd Play
DVD
Ò p
Prev. Play
16
AUDIO
‡ π † ®
Stop Play Ffw Rec Eject
‡ π †
Ï
Stop Play Next Eject
&
Connect the audio cables to the
of your amplifier and to
back of your TV.
é
The output level is controlled by the volume
control of the amplifier.
Note: Switch off the TV and your audio amplifier
before connecting them. Set the audio amplifier's
volume to minimum.
,
EXT1 EXT2, EXT3*
& Press the
MENU
é
Select the
Recorder
cursor up/down.
"
Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
Ï
The key ® for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the B key for 3 seconds,
both TV and the recorder are switched to standby.
input
AUDIO
and at the
AUDIO L R
or according
SIDE
key on the remote control.
or menu with the
DVD