Manual Store; Favourite Programmes; Other Settings In The Install Menu - Philips 28PT7120/12 User Manual

Manual store

This menu is used to store the programmes
one at a time.
H
& Press the
key.
é With the cursor, select the
Manual store
:
Main •
Install •
Language •
Country •
Auto Store •
Manuel Store
Sort •
Program •
Name •
System: Europe
"
select
Western Europe
or
Europe
(DK standard),
France
(I standard) or
* Except for France (LL' standard), you must select

Favourite programmes

This menu allows you to select the programmes
to be accessed with the
H
& Press the
key.
é With the cursor, select the
Favourite Progr.
Main •
Install •
Language •
Country •
Auto Store •
Manuel Store •
Sort •
Favourite Progr.
Name •

Other settings in the Install menu

H
& Press the
key and select the
Language :
é
to change the display language for
the menus.
Country :
"
to select your country (
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your
country does not appear in the list, select ". . . "
Auto Store
'
: to start automatic search for all
programmes available in your region. If the
transmitter or cable network sends the
Install
menu then
System •
Search •
Program No. •
Fine Tune •
Store •
(automatic detection*)
Eastern
(BG standard),
United Kingdom
(LL' standard).
@ #
P key.
Install
menu then
¬
and press .
2 •
Install
GB
choice
Search :
'
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered
directly using the
If no picture is found, consult the possible solutions (p. 12).
Program No. :
(
the
program 1, enter
Fine Tune :
§
adjust using the
Store :
è
! Repeat steps ' to è for each programme to
store.
ç To quit the menus, press
The list of favourite programmes is displayed.
The programmes that were stored at
installation will automatically appear on this
list.
" Use the up/downcursor to select the required
programme.
' Use the left/right cursor to add or remove a
programme from the list.
( Run through steps " and ' for each
programme to be added or removed from the
list.
§ To exit, press
automatic sort signal, the programmes will be
menu:
numbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes (see p. 4).
for
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
In this case, indicate your choice using the
keys and validate with
search, press
possible solutions (p. 12).
( To quit the menus, press
France
.
¬
press .The search starts. Once a
0 9
to
enter the required number with
Ȭ 0 9
or to
01
.
if the reception is not satisfactory,
Ȭ
keys.
¬
press .The program is stored.
d
several times.
¬
.To quit or interrupt the
H
. If no picture is found, consult the
d
keys.
keys. Example :
d
.
îÏ
.
5