Boss DD-200 Owner's Manual page 4

Panel Descriptions
Mode Explanation
Adjusts the sensitivity by which the volume
is automatically adjusted according to
DUCKING
the input. Increasing this value makes the
response more sensitive at lower volumes.
Adjusts the sense of attack for the delay
REVERSE
sound.
7
[TONE] knob
Adjusts the tonal character of the effect sound.
When the knob is in the center position, the response is
flat. Turning the knob toward the right boosts the high-
frequency range, and turning it toward the left cuts the
high-frequency range.
8
[MOD DEPTH] knob
Adjusts the depth at which the effect sound is
modulated.
9
[TAP DIVISION] button
Specifies the delay time in terms of a note length
relative to the BPM.
4
Preventing accidental operation (panel lock)
By long-pressing the [TAP DIVISION] button, you can
switch between enabling (unlocking) or disabling
(locking) operation of the knobs and buttons.
If you attempt an operation while the unit is locked, the
display indicates "LCK. "
10
TAP DIVISION indicator
This indicates the delay time as a note value; the
interval at which you press the pedal is considered as a
quarter note (100%)
TAP DIVISION indicator
ˇ ¸ ˙
TRI
(
(
(
( (
(
(
( (
(
( (
Explanation
DOT
(
Dotted half note (300%)
Half note (200%)
(
Dotted quarter note (150%)
Half-note triplet (133%)
Quarter note (100%)
(
Dotted eighth note (75%)
Quarter-note triplet (67%)
Eighth note (50%)
Eighth-note triplet (33%)