Boss DD-200 Owner's Manual page 13

Parameter
Explanation
Specifies the MIDI receive channel.
If this is "oFF, " MIDI messages are not
RCH
received.
(MIDI RECEIVE CHANNEL)
1–16, oFF
Specifies the MIDI transmit channel.
If this is "oFF, " MIDI messages are not
tCH
transmitted.
(MIDI TRANSMIT CHANNEL)
1–16, RCv (RECEIVE), oFF
Specifies whether program changes are
Pin
received
(PC IN)
Specifies whether program changes
are transmitted
(oFF).
Correspondence between memories
and program numbers
Pot
(PC OUT)
Memory
MAN
MEMORY 1–4
Specifies whether control changes are
received
CCi
By receiving CC messages, this unit
(CC IN)
lets you use MIDI to control the same
operations as a knob or footswitch.
Specifies whether control changes are
CCO
transmitted
(CC OUT)
(oFF).
(on) or not received (oFF).
(on) or not transmitted
Program number
1
2–5
(on) or not received (oFF).
(on) or not transmitted
Parameter
Explanation
TMC
(TIME CC)
FbC
(FEEDBACK CC)
ELC
(E.LEVEL CC)
PRC
(PARAM CC)
TnC
(TONE CC)
Specify the controller number
MdC
corresponding to each controller.
(MOD CC)
oFF, 1–31, 64–95
SWC
(ON/OFF SWITCH CC)
MEC
(MEMORY CC)
C1C
(CTL1 CC)
C2C
(CTL2 CC)
EPC
(EXPRESSION CC)
EFC
Controls the effect on/off status.
(EFFECT ON OFF CC)
Overall Settings (Menu)
13