Installation Tv Set And Remote Control; Switching On - Philips 25PT4523/25 User Manual

2
Installation of the TV set
4 Place your TV set on a solid, stable surface
(please ensure that this surface is strong enough).
For ventilation allow a space of at least 5 cm around the TV set.
Do not place anything on the TV set which might damage it: plants
(risk of water entering the casing), covering material, lamp, or any
other heat source (risk of overheating).
4 Insert the aerial plug into the
4 Insert the mains plug into a wall socket (220-240 V / 50 Hz).
In some countries the mains plug may differ from that illustrated.
Remote control
4 Open the battery compartment on the remote control.
4 Insert the two LR03-type batteries (supplied) making sure they are
the right way round.
In a effort to help protect the environment the batteries supplied with this
television do not contain mercury or nickel cadmium. If a means of recycling
batteries is available please use this (if in doubt contact your dealer).

Switching on

4 Press the A key on the front of the TV set.
5 A green indicator appears and the screen lights up.
If the red indicator comes on, the TV set is in standby mode:
4 Press the
5 The screen lights up.
When the remote control is being used, the indicator flashes orange.
M
socket at the rear.
key on the remote control.