Table of Contents
Advertisement
Symptom
Cannot detect USB
plug-in
Cannot switch to AV-
in or no signal
Switch between
TV/USB/AV-in
Player feels warm
Display goes dimmer
when AC is unplugged
No radio reception
36
Remedy
•
Unplug the USB device and plug in again. The
time taken for detection may vary with the
capacity of your USB device.
•
The TV does not support Hard Disk storage
or Media Transfer Protocol (MTP) format.
•
Unplug the AV-in connection and plug in again.
•
Check the connection from the AV output
device, such as digital camera, video recorder,
etc.
•
Use the provided AV cable for connection.
•
TV mode is the default source after power on.
•
Plugging in USB will activate USB mode.
Deactivate it by unplugging the connection.
•
Do not plug in USB & AV-in at the same time.
Plug in one type connection at a time only.
•
Unplug the connection before you plug in
another connection.
•
When the player is in use for a long period of
time, the surface will be heated. This is normal.
•
The unit is saving power to ensure longer
playtime with battery. It is normal.
•
Adjust the brightness in the SETUP menu.
•
The unit is designed to receive digital signals
only, and it does not support analogue radio
such as FM or AM.
Advertisement
Table of Contents
