Download Print this page

Installation Requirements - Haier HRF15N3 Installation And User Manual

French-door bottom mount refrigerator
Hide thumbs Also See for HRF15N3:

Advertisement

INSTALLATION REQUIREMENTS

LOCATION REQUIREMENTS
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline,
away from appliance.
Failure to do so can result in death, explosion or fire.
IMPORTANT: This refrigerator is designed for indoor,
household use only.
To ensure proper ventilation for your refrigerator, allow for 1"
(2.54 cm) of space on each side, 2" (5.08 cm) of space behind
the refrigerator, and open at the top.
NOTE: This refrigerator is intended for use in a location
where the temperature ranges from a minimum of 55°F
(13°C) to a maximum of 110°F (43°C). The preferred
room temperature range for optimum performance,
which reduces electricity usage and provides superior
cooling, is between 60°F (15°C) and 90°F (32°C). It is
recommended that you do not install the refrigerator
near a heat source, such as an oven or radiator.
INSTALLATION INSTRUCTIONS
STEP 1 - UNPACK REFRIGERATOR
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical
connection.
Recommended Grounding Method
A 115 volt, 60 Hz, AC only 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a
separate circuit serving only your refrigerator be provided.
Use an outlet that cannot be turned off by a switch. Do not
use an extension cord.
NOTE: Before performing any type of installation or
cleaning, disconnect the refrigerator from the electrical
source. When you are finished, reconnect the
refrigerator to the electrical source and reset the
temperature controls to the desired setting.
WARNING
Broken Glass Hazard
Do not hit refrigerator glass doors.
Protect glass surface and edges during installation or
removal of doors.
Failure to do so can result in serious eye injury or minor
cuts.
4

Hide quick links:

Advertisement

loading