EMC VNX5500 Parts Location Manual
  1. Manuals
  2. Brands
  3. EMC Manuals
  4. Storage
  5. VNX5500
  6. Parts location manual

EMC VNX5500 Parts Location Manual

Hide thumbs Also See for VNX5500:
Table of Contents

Advertisement

Quick Links

®
™
EMC
VNX
Family
™
VNX5500
Parts Location Guide
P/N 300-013-314
Rev 01
June 26, 2012
This guide describes one of five models available in the VNX Series, the EMC
VNX5500™. This guide is a parts location guide and provides illustrations of the part
number label locations of orderable parts for the EMC VNX5500 platform. Included in this
parts location guide are also tables describing the individual VNX5500 parts or
components and how these components are identified as either customer replaceable
units (CRUs) or field replaceable units (FRUs).
This guide is available online at
VNX Hardware Parts heading, click on the desired guide. The guide will appear in your
browser.
Topics include:
Vnx5500 Block And File Platform Stackup ................................................................. 4
◆
Vnx5500 Components .............................................................................................. 8
◆
Standby Power Supply (Sps) ..................................................................................... 9
◆
Disk Processor Enclosure (Dpe) ................................................................................. 9
◆
Sp Power Supply/Cooling Module ............................................................................ 13
◆
SP........................................................................................................................... 14
◆
Control Station........................................................................................................ 16
◆
Data Mover Enclosure ............................................................................................. 17
◆
Data Mover Power Supply/Cooling Fan Module......................................................... 18
◆
Data Mover Cpu Module.......................................................................................... 19
◆
Management Module .............................................................................................. 22
◆
I/O Modules............................................................................................................ 22
◆
Small Form-Factor Pluggable (Sfp) ........................................................................... 34
◆
DIMMs .................................................................................................................... 37
◆
Disk-Array Enclosure (Dae) ...................................................................................... 41
◆
https://mydocs.emc.com/VNX/relatedDocs.jsp.
®
From the

Advertisement

Table of Contents
loading

Related Manuals for EMC VNX5500

Summary of Contents for EMC VNX5500

  • Page 1 This guide describes one of five models available in the VNX Series, the EMC VNX5500™. This guide is a parts location guide and provides illustrations of the part number label locations of orderable parts for the EMC VNX5500 platform. Included in this...

  • Page 2: Revision History

    Product software and hardware release revisions As part of an effort to improve its product lines, EMC periodically releases revisions of its software and hardware. Therefore, some functions described in this document might not be supported by all versions of the software or hardware currently in use.

  • Page 3: How This Document Is Organized

    41 three types of DAEs available for the VNX5500. Related documentation EMC provides the ability to create step-by-step planning, installation, and maintenance instructions tailored to your environment. To create VNX customized documentation, go to: https://mydocs.emc.com/VNX/. To download a PDF copy of the desired publication, go to the following sections: For hardware-related books, go to the About VNX section, and then select Learn about ◆...

  • Page 4: Vnx5500 Block And File Platform Stackup

    Front view On the front, viewing from top to bottom, a Block and File VNX5500 platform includes the following hardware: One to two 2U Data Mover enclosures with one, two, or three Data Movers ◆...
  • Page 5 0 Control Station 1 (optional) Control Station 0 3U, 15 (3.5-inch) disk processor enclosure (DPE) VNX-000566 Figure 1 Example of the Block and File VNX5500 platform with a 3U, 15 (3.5-inch) DPE (front view) EMC VNX5500 Parts Location Guide...
  • Page 6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 VNX-000615 Figure 2 Example of the Block and File VNX5500 platform with a 3U, 25 (2.5-inch) DPE (front view) Note: A basic Block and File VNX5500 platform has one to two 2U Data Mover enclosures, one to two 1U Control Stations, a 3U DPE, and a dual 1U SPS.
  • Page 7 VNX5500 Block and File platform stackup Figure 3 shows an example of the rear of a Block and File VNX5500 platform with a dual SPS, a DPE, two Control Stations, two Data Mover enclosures with three Data Movers. Data Mover...

  • Page 8: Vnx5500 Components

    VNX5500 components VNX5500 components Viewing from the bottom to the top, the Block and File VNX5500 platform includes several components. The following sections discuss each component in an illustration and table. The illustration will show or point out the location of the part number label on the component.

  • Page 9: Standby Power Supply (Sps)

    Standby power supply (SPS) Standby power supply (SPS) The Block and File VNX5500 platform can support up to two 1U standby power supplies or dual (SPSs) to provide temporary emergency power to the Block and File VNX5500 platform. Part numbers for the SPS are only on the rear of the product.
  • Page 10 Due to the extensive variety of disk module types, Table 2 only lists two disk types. EMC EMC VNX5500, VNX5700, and VNX7500 Series recommends that you refer to the latest Storage Systems Disk and OE Matrix Guide to ensure that you have the correct part for your configuration.
  • Page 11 Due to the extensive variety of disk module types, Table 3 only lists two disk types. EMC EMC VNX5500, VNX5700, and VNX7500 Series recommends that you refer to the latest Storage Systems Disk and OE Matrix Guide to ensure that you have the correct part for your configuration.
  • Page 12 Four-port 1-Gb/s copper iSCSI I/O   module 303-081-105B Two-port 10-Gb/s optical with iSCSI   protocol I/O module 303-142-100A Two-port 10-Gb/s FCoE I/O module   303-164-104D-01 Two-port 10-Gb/s RJ-45 Base-T   iSCSI/IP EMC VNX5500 Parts Location Guide...

  • Page 13: Sp Power Supply/Cooling Module

    SP power supply/cooling module Figure 8 shows the part number label location on the power supply/cooling module used in the Block and File VNX5500 platform SPs (A and B). Part number (P/N) label VNX-000608 Figure 8 Example of a power supply module/cooling...
  • Page 14  To access the SP CPU, you must first remove the SP from the 3U DPE (Figure 10 on page 15). Then, you must remove the power supply/cooling fan modules (Figure 11 on page 15). EMC VNX5500 Parts Location Guide...
  • Page 15 Figure 11 Example of removing the SP power supply/cooling module from the SP The part number labels for the SP and the SP CPU module in Figure 12 are listed in Table 6 on page EMC VNX5500 Parts Location Guide...

  • Page 16: Control Station

    FRU or CRU. Table 7 Control Station front view part number Part number label location (Figure Part number Description 100-520-665 Control Station (CS) 1U  EMC VNX5500 Parts Location Guide...

  • Page 17: Data Mover Enclosure

    Data Mover 2.13-GHz CPU module  without memory (for a closer view, Figure 17 on page 1. The part number label on the power supply/cooling fan module is located on the lower half of the pull handle. EMC VNX5500 Parts Location Guide...

  • Page 18: Data Mover Power Supply/Cooling Fan Module

    FRU or CRU. Table 9 Power supply module/cooling fan part number Part number label location (Figure Part number Description 071-000-543 Data Mover 400 W, 2U, single 12 V   output power supply/cooling fan module EMC VNX5500 Parts Location Guide...

  • Page 19: Data Mover Cpu Module

    Data Mover CPU partially removed with the two power supply/cooling (fan) modules set aside. The part number label for the Data Mover and the CPU module in Figure 17 are listed in Table 10 on page EMC VNX5500 Parts Location Guide...
  • Page 20 Data Mover enclosure (empty)  110-130-100B Management module (for a closer   view, see Figure 19 on page 303-092-102B Four-port 8-Gb/s Fibre Channel (FC)   I/O module (for a closer view, see Figure 20 on page EMC VNX5500 Parts Location Guide...
  • Page 21 Figure 29 on page 4. This part is not shown in the example Data Mover enclosure illustration in Figure 18 on page 20. For a closer view, go to Figure 28 on page EMC VNX5500 Parts Location Guide...

  • Page 22: Management Module

      I/O modules In the Block and File VNX5500 platform, I/O modules are used in the disk processor enclosure (DPE) storage processors (SP A and B) and in the Data Movers of the Data Mover enclosure. Each I/O module is identified by a part number, type of ports (copper or optical), latch handle label, and color label on top of the latch handle.

  • Page 23: Data Mover

    I/O modules Table 13 I/O module types for VNX5500 Latch Latch handle handle I/O module Part number Ports label label color Four-port 8-Gb/s FC 303-092-102B Optical 8 Gb Fibre Silver Four-port 1-Gb/s 303-141-100A Copper 1 GbE iSCSI/TOE Orange Two-port 10-Gb/s (w/iSCSI) 303-081-105B...
  • Page 24 FRU or CRU. Table 14 Four-port 8-Gb/s FC I/O module part numbers Part number label location (Figure Part number Description 303-092-102B Four-port 8-Gb/s FC (2/4/8 Gb/s)   EMC VNX5500 Parts Location Guide...
  • Page 25 FRU or CRU. Table 15 Four-port copper I/O module part number Part number label location (Figure Part number Description 303-141-100A Four 1-Gb/s copper iSCSI ports   EMC VNX5500 Parts Location Guide...
  • Page 26 FRU or CRU. Table 16 Two-port 10-Gb-s optical (w/iSCSI protocol) I/O module part number Part number label location (Figure Part number Description 303-081-105B Two-port 10-Gb/s optical (w/iSCSI   protocol) I/O module EMC VNX5500 Parts Location Guide...
  • Page 27 1. The FCoE I/O module can also use twinaxial (Twinax) cables. Twinax is a type of cable similar to coax, but with two inner conductors instead of one. These cables will be supplied in lieu of SFPs when so ordered. EMC VNX5500 Parts Location Guide...
  • Page 28 FRU or CRU. Table 18 Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module part number Part number label location (Figure Part number Description 303-122-100A Two-port 1-Gb/s copper plus   two-port 1-Gb/s optical EMC VNX5500 Parts Location Guide...
  • Page 29 FRU or CRU. Table 19 Two-port optical I/O module part number Part number label location (Figure Part number Description 303-081-103B or C Two-port 10-Gb/s optical I/O   module EMC VNX5500 Parts Location Guide...
  • Page 30 FRU or CRU. Table 20 Four-port 1-Gb/s copper I/O module part number Part number label location (Figure Part number Description 303-121-100A Four 1-Gb/s copper ports   EMC VNX5500 Parts Location Guide...
  • Page 31 FRU or CRU. Table 21 Four-port 6-Gb/s SAS I/O Module part numbers Part number label location (Figure Part number Description 303-163-100B Four-port 6-Gb/s SAS   EMC VNX5500 Parts Location Guide...
  • Page 32 FRU or CRU. Table 22 Two-port 10-Gb/s RJ-45 Base-T iSCSI IP I/O module part number Part number label location (Figure Part number Description 303-164-104D-01 Two-port 10-Gb/s RJ-45 Base-T   iSCSI/IP I/O module EMC VNX5500 Parts Location Guide...
  • Page 33 FRU or CRU. Table 23 Two-port 10-Gb/s optical I/O module part number Part number label location (Figure Part number Description 303-195-100C-01 Two-port 10-Gb/s Optical I/O   module EMC VNX5500 Parts Location Guide...

  • Page 34: Small Form-Factor Pluggable (Sfp)

    Small form-factor pluggable (SFP) Small form-factor (SFP) modules are compact, hot-pluggable transceivers inserted into the SFP or SFP+ slot of an I/O module in a Block and File VNX5500 platform. This transceiver module provides uplink optical interfaces, laser send or transmit (TX) and laser receive (RX).
  • Page 35 ◆ I/O modules using SFP or SFP+ transceiver modules In the VNX5500 platform, the SFP or SFP+ transceiver modules are located in the ports of the following I/O modules: Four-port 8-Gb/s Fibre Channel (FC) for 2, 4, and 8 Gb/s speed ◆...
  • Page 36   (SFP+) Channel (FC) I/O module Note: Only the two optical ports (physically labeled on this I/O module as 2 and 3, but logically fge- -2 and fge- -3) use this type of SFP. EMC VNX5500 Parts Location Guide...

  • Page 37: Dimms

    Figure 31 on page 38). A label on the DIMM cover also identifies the DIMM slots as DIMM 0, DIMM 1, and DIMM 2. In the VNX5500 Block and File (Unified) platform, the DIMMs are placed in slots 0, 1, and 2.
  • Page 38 SP DIMM with a part number label. Ê100-562-264vŠ Rev : A01 ÊA01.Š P/N : 100-562-xxx Part Number (P/N) label CNS-001540 Figure 32 Example of the Block and File VNX5500 platform SP DIMM part number location EMC VNX5500 Parts Location Guide...
  • Page 39 VNX Procedure Generator program. Note the orientation of the VNX5500 Block and File platform Data Mover DIMMs (see locations DIMM 0, DIMM 1, DIMM 2, DIMM 3, DIMM 4, and DIMM 5 in Figure 33 on page 40).
  • Page 40 Data Mover DIMM part number label location. Ê100-562-264vŠ Rev : A01 ÊA01.Š P/N : 100-562-xxx Part Number (P/N) label CNS-001540 Figure 34 Example of the Block and File VNX5500 platform Data Mover DIMM part number location EMC VNX5500 Parts Location Guide...

  • Page 41: Disk-Array Enclosure (Dae)

    Disk-array enclosure (DAE) Table 26 lists the Data Mover DIMM part number label location, part number, description, and whether it is a FRU or CRU. Table 26 VNX5500 platform Data Mover CPU DIMM part numbers Part number label location (Figure 34 on...
  • Page 42 Due to the extensive variety of disk module types, Table 27 only lists two disk types. EMC EMC VNX5500, VNX5700, and VNX7500 Series recommends that you refer to the latest Storage Systems Disk and OE Matrix Guide to ensure that you have the correct part for your configuration.
  • Page 43 Due to the extensive variety of disk module types, Table 28 only lists two disk types. EMC EMC VNX5500, VNX5700, and VNX7500 Series recommends that you refer to the latest Storage Systems Disk and OE Matrix Guide to ensure that you have the correct part for your configuration.
  • Page 44 Figure 38 on page 45). Note: If the 4U, 60 DAE does not slide out of the rack, verify that all the other DAEs are completely seated in the rack by pushing firmly on them. EMC VNX5500 Parts Location Guide...
  • Page 45 When lifting this DAE, always use two people and a lifting device. For service personnel, when accessing this unit in a rack above 31U, always use an EMC authorized step ladder. When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at or close to the bottom of the rack.
  • Page 46 4U, 60 DAE with the top cover open showing the disk drives, LCCs, and the fan control modules (or fans). Top cover VNX-000649 Figure 40 4U, 60 DAE (with top cover open) EMC VNX5500 Parts Location Guide...
  • Page 47 (fan control modules), and LCC A. disk LCC A (cooling module) CL4735 Figure 42 4U, 60 DAE top-down cut-away of the disk drives, fans (fan control modules), and LCC A (interior view) EMC VNX5500 Parts Location Guide...
  • Page 48 FRU or CRU. IMPORTANT Due to the extensive variety of disk module types, Table 30 only lists two disk types. EMC EMC VNX5100 and VNX5300 Series Storage recommends that you refer to the latest Systems Disk and OE Matrix Guide to ensure that you have the correct part for your configuration.
  • Page 49 FRU or CRU. Table 32 DAE 4U, 60 LCC part numbers Part number label location (Figure Part number Description (see note) 303-171-000B Link Control Card   EMC VNX5500 Parts Location Guide...
  • Page 50 LCC B power supply is located on the top of LCC B. While LCC A is located on the bottom of the DAE with LCC A on top of the LCC A power supply (Figure 46). EMC VNX5500 Parts Location Guide...
  • Page 51 4U, 60 (2.5- or 3.5-inch) DAE for the ICM and the power supply. VNX-000674 Figure 48 Example of 4U, 60 (2.5- or 3.5-inch) DAE ICM and power supply EMC VNX5500 Parts Location Guide...
  • Page 52 Copyright © 2012 EMC Corporation. All rights reserved. Published in the USA. Published June 26, 2012 EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. The information in this publication is provided as is. EMC Corporation makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose.

Table of Contents