Lower Anchor Installation - Dorel Juvenile Group COSCO Manual

Highback 2-in-1 booster car seat
Table of Contents

Advertisement

Lower Anchor Installation

WARNINGS:
Check the lower anchor belt before
each use. Use only if the belt can be tightened
properly and securely.
Do not fasten multiple lower anchor hooks on the
same lower anchor bar in the vehicle.
Failure to follow these warnings can result in serious
injury or death.
1.
Remove Lower Anchor
from Packaging
Pull lower anchor belt packaging out
of forward-facing belt path.
Remove lower anchor from
packaging.
Discard the packaging.
2.
Route Lower Anchor Belt
Through Forward-Facing
Belt Path
Do not twist belt.
Lower anchor adjuster can be on
either side.
3.
Finished Lower Anchor
Routing
25
4.
Place Child Restraint
Forward Facing Flush
Against Vehicle Seat Back
5.
Loosely Attach Tether
Hook
Check vehicle owner's manual for
specific location.
6.
Attach Lower Anchor
Hooks to Vehicle's
Lower Anchors
Review your vehicle owner's
manual for lower anchor locations
and lower anchor belt use.
7.
Tighten Belt
Place hand in child restraint.
Firmly push down while pulling free
end of belt to tighten.
continued on next page
26

Advertisement

Table of Contents
loading

Table of Contents