Philips 42PF7621D/10 User Manual page 10

2584.3 en.qxd 29-03-2007
EN
DVD STB TV VCR AUX
SELECT
DEMO
OPTION
®
OK
®
®
BROWSE
MENU
+
-
_-
Please select your
language.....
PHILIPS
using cursor up and
down
Next
PHILIPS Installation
This will help you to install the following
sections:
Television
Settings assistant
Previous Next
PHILIPS Television
System searching: please wait..........
Digital channels found
Analogue channels found
Stop
10
10:48 Pagina 10
First time installation (Continued)
Step 1: select your on-screen language
After the Welcome screen you are asked to select a language of
the TV's on-screen menus.The text of the header and the info
on screen continuously change language. Also the digital audio
and subtitle language will be set to the selected menu language.
1. Press the cursor up/down to highlight your language.
2. Press the
3. Follow the instructions on screen to proceed.
Step 2: complete the initial TV installation
®
procedure
1. Press the green colour key on your remote control when
Television is highlighted.
2. Select the country where you are now located.
+
Notes:
- if you select a wrong country, the channel numbering will
-
not be according to the standard for your country.
- in case the country selected is not DVB-T supported by
your TV, digital related menu-items will not be
Menu language
accessible.
English
Español
3. Press the green colour key on your remote control to start
Français
the Automatic channel installation.
Hrvatski > All available digital TV and radio channels and analogue
Italiano
Magyar
.............
Notes:
- reception of digital terrestrial TV channels is applicable
dependent on the country selected;
- if you choose to install the channels at a later time, select
the Automatic installation in the TV menu, Installation,
Channels to scan available channels.
4. Press the red colour key again when the search is
Skip Stop
completed.
16
22
key on the remote control.
OK
TV channels are searched for and stored automatically.
This will take a few minutes.When the search is
complete, the menu will indicate the number of digital
and analogue channels found.