Manual installation
This gives you the possibility to manually
install (tuning-in channel by channel) analogue
channels.
Select Manual installation and press the π
1
key.
Select System.
2
Select your country or part of the world
3
where you are now located.
Select Search and press the π key.
4
Tip
If you know the frequency, enter the 3 digits
of the frequency with the digit keys 0 to 9 (For
example, 049).
Select the red or green colour key to
5
proceed.
Press the p key to store the channel found
6
or to search for another channel.
Select Fine tune and press the π key.
7
Fine tuning can be useful when the
frequency has shifted a bit or when
interference of another frequency occurs.
Adjust the frequency with the o or œ key
in case of poor reception of the channel
found.
Select Store current channel if you want
8
to store the frequency under the current
channel number.
Press the π key and confirm with the OK
key.
Select Store as new channel if you want to
store the frequency under a new channel
number.
Press the π key and confirm with the OK
key.
Use the rearrange menu to rearrange or
9
rename the channels.
24
6.5 Rearrange the channel number list
This allows you to rename, to rearrange and to
uninstall or reinstall the stored channels.
Press the corresponding colour keys and
1
follow the on screen instructions.
TV menu
Installation
Languages
Country
Channels
Preferences
Connections
Decoder
Info
TV menu/Installation
Channels
Automatic instal...
Installation update
Digital: test rec....
Analogue: manual
Rearrange
Info
Rename
Uninstall
Channels
Autom. installation
Installation update
Rearrange
Rearrange
0
1
2
3
4
5
6
7
Rearrange
0
1
2
3
4
5
6
7
Move
Move
up
down