Connecting the power cord
Connecting the AC power module
Insert the female connector of the AC power cord supplied with the power module into the
1.
power receptacle on the power module.
Use a cable tie to secure the power cord to the handle of the power module, as shown in
2.
20.
Connect the other end of the power cord to an AC power outlet.
3.
Figure 20 Connecting the LSVM1AC300 power module on the S6520-52QF-EI switch
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power module
Connecting the DC power module
Unpack the DC power cord, identify the plug for connecting to the power module, orient the plug
1.
with the power receptacle on the power module, and insert the plug into the receptacle
(see
Figure
The receptacle is foolproof. If you cannot insert the plug into the receptacle, re-orient the plug
rather than use excessive force to push it in.
Use a cable tie to secure the power cord to the handle of the power module, as shown in
2.
20.
Connect the other end of the power cord to the DC power source.
3.
Figure 21 Connecting the LSVM1DC300 power module on the S6520-52QF-EI
21).
17
Figure
Figure