Hdmi (High Definition Multimedia Interface) Connector; Multi Channel Surround Receiver - Philips Matchline 32PF9996/78 User Manual

HDMI (High Definition Multimedia Interface) connector

AUDIO
CENTRE
SUBW.
2
1
Connect the digital HDMI output of your HD device (e.g. PC, DVD player, Set Top Box..) 1 to the
&
connector of your TV.
HDMI
In case a HD-DVI device (and if audio is present) is connected also connect the audio cable 2 to the
é
outputs of your HD device and to the
AUDIO
of the TV.
Notes:
- Proper working is only guaranteed with HDMI compliant consumer products.
- Digital devices from different manufacturers have the possibility of differing output standards which may cause
difficulties for the television to properly display;
- If the set is cold, there may be a small "flicker" when the set is turned on. This is normal, there is nothing wrong
with the set.
- If possible, use the XGA 1024x768@60Hz video mode to obtain the best image quality for your monitor.
- In case no signal is detected from your HDMI device, turn off the HDMI device and then on again.
To get an optimal viewing, it is advised to switch your DVD player to one of the following TV display standards:
720x480p, 720x480i, 1280x720p or 1920x1080i.

Multi channel Surround receiver

AUDIO
CENTRE R
L
SUBW.
2
HDMI is the leading new standard for Digital High Definition
HDMI IN
video and audio interconnection. Eg. with a Digital Set top box,
R
R
with HDMI-equipped devices like a PC, DVD-R, AV receiver...
HDMI
Note: the HDMI connector is compatible with DVI-devices and a DVI
L
L to HDMI conversion cable is included. (Then also connect the audio
cables.)
The
- the following TV and monitor display modes:
1
- uncompressed HD content
- encrypted or non encrypted signals.
&
1
é
"
connector allows
HDMI IN
EDTV 640/720 x 480p
720 x 576p
HDTV 1920 x1080i
1280 x 720p
1152i
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
(right) and (left)
R L
Connect the audio cable to the multi channel Surround
receiver and to
AUDIO RECEIVER L
connector of your TV 1.
CENTRE
Note: turn off the TV and your surround receiver before
connecting them. Set the Surround receiver's volume to
minimum.
If you want the loudspeakers of your TV to act as center
speaker, also connect an audiocable to the multi channel
Surround receiver and to the
your TV 2.
Select
Center Input On
The loudspeakers of the TV will now only produce
center sound, the loudspeakers connected to the audio
receiver will produce Surround Sound.The volume has
to be controlled via the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external
source is blocked via the Channel Lock menu (see p. 14).
60 Hz
60 Hz
60 Hz
inputs of the panel
HDMI (AV3)
and next to the
R
connector of
CENTRE
in the Source menu. See p. 10.
21