Hdmi (High Definition Multimedia Interface) Connector; Multi Channel Surround Receiver - Philips Cineos 32PF9630/78 User Manual

HDMI (High Definition Multimedia Interface) connector

2
Notes:
- Proper working is only guaranteed with HDMI compliant consumer products.
- Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to
properly display;
- If the set is cold, there may be a small "flicker" when the set is turned on. This is normal, there is nothing wrong with the set.
- If possible, use the XGA 1024x768@60Hz video mode to obtain the best image quality for your monitor.
- In case no signal is detected from your HDMI device, turn off the HDMI device and then on again.
To get an optimal viewing, it is advised to switch your DVD player to one of the following TV display standards: 1920x1080i, 1280x720p, 720x480i
or 720x480p.

Multi channel Surround receiver

AUDIO
CENTRE R
L
SUBW.
2
AUDIO HDMI IN
R
CENTRE R
HDMI
L
SUBW. L
1
1
1
HDMI is the leading new standard for Digital High Definition video and
audio interconnection. Eg. with a Digital Set top box, with HDMI-
equipped devices like a PC, DVD-R, AV receiver...
Note: the HDMI connector is compatible with DVI-devices and a DVI to HDMI
conversion cable is included. (Then also connect the audio cables.)
The connector allows
HDMI IN
- the following TV and monitor display modes:
EDTV 640/720 x 480p
720 x 576p
HDTV 1920 x1080i
1280 x 720p
1152i
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
- uncompressed HD content
- encrypted or non encrypted signals.
&
Connect the digital HDMI output of your HD device (e.g. PC, DVD
player, Set Top Box..) 1 to the
é In case a HD-DVI device (and if audio is present) is connected also
connect the audio cable 2 to the
device and to the (right) and
R
panel of the TV.
&
Connect the audio cable to the multi channel Surround receiver
and to
AUDIO RECEIVER L
of your TV 1.
Note: turn off the TV and your surround receiver before connecting them.
Set the Surround receiver's volume to minimum.
é If you want the loudspeakers of your TV to act as center speaker,
also connect an audiocable to the multi channel Surround receiver
connector of your TV 2.
and to the
CENTRE
"
Select
Center Input On
The loudspeakers of the TV will now only produce center sound,
the loudspeakers connected to the audio receiver will produce
Surround Sound.The volume has to be controlled via the multi
channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is blocked
via the Channel Lock menu (see p. 14).
60 Hz
60 Hz
60 Hz
connector of your TV.
HDMI
outputs of your HD
AUDIO
(left) inputs of the
L HDMI (AV3)
and next to the
R CENTRE
in the Source menu. See p. 9.
connector
21