Activating Cinemalink; Receiver Menu; Sound Menu - Philips 32PF9966/10 User Manual

Activating CinemaLink

Continue to press the Ì-key on the remote control for more than 4 seconds.
& The TV sends a play command to the Cinema Link DVD player, if present.
é
The DVD player will start playing and the audio receiver automatically switches to the best Cinema Link sound.
"
If no DVD player is connected or if the DVD player has no disc loaded, the command can not be executed.
' The TV will then send a play command to the Cinema Link recorder, if present.
( The recorder will start playing and the audio receiver selects the best Cinema Link sound.
§
If no recorder source is connected or tape is loaded, the TV will select the last watched TV channel.

Receiver menu

TV
Sound
DVD
Recorder
Receiver
Setup
Demo
Install

Sound menu

Sound
Receiver
Smart Sound
Treble
Bass
Loudness
3D effect
Night mode
Audio Only
28
Note: When Cinema Link is enabled, certain items of the Sound menu (see TV menu) are steered by the
audio receiver instead of by the TV.
Surround Speakers Automatic
installation installation
& Press the key on the remote control.
MENU
é
Press the cursor down to select
"
Press the cursor right to enter the Receiver menu items.
'
Press the cursor up/down to select the submenu items.
Note: the audio receiver submenu items may only be selected if provided by the audio receiver (dependent
on the configuration setup and the sound signals transmitted).
Dependent on the audio receiver speakers configuration, you may not be able to select certain menu
items.
Smart Sound,Treble, Bass
See the Instructions for Use for the TV.
Loudness
When is selected and when listening at low volume, the low and high frequencies
Loudness On
are amplified so that the natural balance is restored.
3D effect
3D effect enables you to experience the effect of Dolby Surround Pro Logic without the need of
having rear speakers connected or activated.
Select the level of 3D effect with the cursor left/right.
Manual Give name Reshuffle
.
Receiver