Figure 4-5 Intfc 3 Enet Menu - Motorola OM 1000 Installation And Operation Manual

4-10 Setup and Operation
Key Field Description
G 5 Configures operating parameters for optional
options as described for
external clock, or slv on rx clock). The INTFC menu displays UNEQPD if the
communications board is not present and configured. Refer to the operate.txt file
in Appendix C, "Initialization Information."
H 6 MOD Displays the INTFC 6 menu. Refer to Setting up
instructions on setting up the modulator port.
I 7 GEN Displays the INTFC 7 menu that shows the MPEG message generator port, for
example, GEN_PORT 03 EA-PID 1503H.
INTFC 1 Menu⎯Viewing
To view the RS-232 console port setting, select 1 CONSOLE and then press
displays asynchronous communications at 9600 baud.
INTFC 2 Menu⎯Setting Up
To configure operating parameters for
1
Select 2 530/232 and then press
2
Select the data rate field, press
9600, 19.2K), and then press
INTFC 3 Menu⎯Setting Up
To configure operating parameters for
1
Select 3 ENET and then press
IGMP settings, and a menu selection for the assigned multicast MAC receive address.
Figure 4-5 illustrates the INTFC 3-ENET menu:
Figure 4-5
INTFC 3 ENET menu
A
C
OM 1000 Installation and Operation Manual
2, if present. Select async or sync (internal clock,
PORT
1 (RS-232 Console Port) Settings
PORT
2 (RS-530/RS-232)
PORT
:
PORT 2
to display the RS-232 menu.
ENT
or to select the data rate (300, 600, 1200, 2400, 4800,
.
ENT
3 (Ethernet)
PORT
:
3
PORT
to display the fields for the MAC address, TTL settings,
ENT
D
5. Configure the data and baud
PORT
6 (the RF modulator) for
PORT
B
E
. The menu
ENT
F