Table of Contents
Advertisement
Safety warnings
Make your connections
Remote control
Switch the TV on
2
UK - EIRE
Do not insert the power plug in a wall socket or hang the TV to the wall
before all connections are made.
&
Wall mounting instructions/Table stand/Swivel
How to mount the supplied stand and/or wall mount bracket and the
swivel, see the supplied separate Quick Start Guide.
Caution
: Installing the TV requires special skills that should only be
performed by qualified personnel.You should not attempt to do the work
yourself. Philips bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using the supplied bracket to mount the TV:
- You can ask a qualified service personnel about using the bracket to
mount the display on the wall.
- Follow the instructions that come with the bracket before beginning
work.
- Make sure that the wall mount is being fixed securely enough so that it
meets safety standards.
The weight of the TV (excl. packaging) is about 27 kg.
é
Place or hang the TV wherever you want, but make sure that air can
circulate freely through the ventilation slots. Do not install the TV in a
confined space such as a book case or a similar unit.To prevent any unsafe
situations, no naked flame sources, such as lighted candles, should be placed
in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.
The equipment shall not be exposed to dripping or splashing.
Insert the aerial plug firmly into the aerial socket x at the bottom of the
&
TV. For best picture quality use the suppressor-aerial cable supplied.
é
Before installing your TV, connect all your peripheral equipment.
"
Insert the mains cord supplied into the mains at the bottom of the TV and
in the wall socket having a mains voltage of 198-264V.
To prevent damaging the power (AC) cord which could cause a fire or
electric shock, do not place the TV on the cord.
Insert the 2 batteries supplied (Type R6-1,5V).
Be sure the (+) and (-) ends of the batteries line up correctly (inside of
case is marked.)
Press the power switch B at the top of the TV.
An indicator on the front of the TV lights up and the screen comes on. If
the TV is in standby mode, press the
control.
keys or the B key on the remote
-P+
Advertisement
Table of Contents
