Connection Setup - Philips Aurea 37PFL9903H/10 User Manual

7.5

Connection setup

The TV needs to know what connections you have
made and which device is connected to which
connector.
If you have used the Connection assistant the
connection setup is already done.
7.5.1 Naming your devices
Name the connected devices for easy selection and
best signal handling.
Assign the type of device (DVD, VCR, Game, ...) to
the connector you use for that device.
‡ Press Menu Ï on the remote control and
select Setup > Installation> Rename devices.
® Press π to enter the list.
Ò Press o or œ to select the connector you
used for the device you connected.
† Press π.
º Press o or œ to select the type of device.
◊Press Menu Ï to quit the menu.
7.5.2 Audio setup (if present)
If you use the Audio In L/R (DVI to HDMI)
connector for a device connected to HDMI at the
back of the TV, assign this Audio In to the HMDI 1,
2 or 3 where the device is connected.
‡ Press Menu Ï on the remote control and
select Setup > Installation > Audio setup.
® Press π twice.
Ò Press o or œ to select the HDMI connection
to link with this Audio In.
Audio setup Audio in L/R
Audio in L/R None
HDMI 1
HDMI 2
HDMI 3
44
7.5.3 Decoder channels
Decoders that decode an antenna channel are
connected to EXT1 or EXT2 (scart).
You have to assign the TV channel as a channel to
be decoded. Then assign the connection where the
decoder is connected
‡ Press Menu Ï on the remote control and
select Setup > Installation > Decoder >
Channel.
® Press π to enter the list.
Ò Press o or œ to select the channel to decode.
† Press p and go back to select Status.
º Press o or œ to select the connector used by
the decoder.
◊Press Menu Ï to quit the menu.
Installation Decoder
... Channel
Connections assist. Status
Rename devices
Audio setup
Decoder
Man. network inst.
Clock
Factory settings
Connections