Wireless Mac Filtering - TP-Link Archer C20 User Manual

Chapter 4
•
4. 3. 4.
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
I want to:
How can I
do that?
Downloaded from www.Manualslib.com
152-bit - Enter 32 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 16 ASCII characters.

Wireless MAC Filtering

Deny or allow specific wireless client devices to access my
network by their MAC addresses.
For example, you want the wireless client A with the MAC
address 00-0A-EB-B0-00-0B and the wireless client B with the
MAC address 00-0A-EB-00-07-5F to access the router, but
other wireless clients cannot access the router.
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to
3. Click
4. Select
the list to access
5. Delete or disable all entries if there are any entries already.
6. Click
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Leave the status as Enabled.
4 ) Click
7. The configured filtering rules should be listed as the picture
shows below.
manuals search engine
Wireless > Wireless MAC
Enable to enable the Wireless MAC Filtering function.
Allow the stations specified by any enabled entries in
as the filtering rule.
Add New and fill in the blanks.
Save and click Back.
Filtering.
29