KX-TD7685
11.2.6. Check Transmitting Power
1. Connect the co-axial cable of handset to CTS60.
2. Press Start and confirm the configration on the CTS60.
Config Synchronisation
Dummy Slot
Dummy Carrier
Traffic Slot
Traffic Carrier
RF Level
Carrier No. Offset
Mode
RFPI
3. Run the test command "loopback mode (PP) " to the handset.
Input RFPI "0102030405" and then send command.
4. Press connect on the CTS60.
5. Make sure NTP is from 15 dBm to 21 dBm.
Cross Reference:
"loopback mode (PP)" : 7.3.1. Select from Command Menu_(E).
0
0
2
2
-73.0dBm
-18
Loopback
0102030405
52