Part Names (Of The Document Imaging Camera Model) - Toshiba TLP-X10E Manual

Part names (of the document imaging camera model)

CAUTION
When using the camera, be careful to not
pinch your hand or fingers into the arm.
On the document imaging camera model, you can
project pictures using the document imaging camera.
The document imaging camera can directly project any
materials (documents, illustrations, etc.) without using an
OHP film.
Arm
LED light
Infrared remote sensor
16
Camera head
Focusing ring
77
Camera lens
Camera control panel
LED RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LED PRODUCT
WAVE LENGTH: 425-750nm
MAX OUTPUT: LESS THAN 1mW
(The models TLP-X10E, TLP-X11E, TLP-X20E, TLP-X21E do not have the label.)
LOCK (W.BALANCE) indicator
Lights when the white balance is locked.
W.BALANCE button
To switch white balance settings between automatic
adjustment and lock.
STORE IMAGE button
To store camera images into the memory card.
ARM LIGHT button
To turn on or off the light.
W.BALANCE STORE IMAGE ARM LIGHT
LOCK
CAMERA CAMERA
GAIN
CAMERA GAIN (+/-) button
To adjust the camera gain.
Caution - use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
RAYONNEMENT LED
NE PAS REGADER DANS LE FAISCEAU
APPAREIL A LED DE CLASSE 2
LONGUEUR D'ONDE: 425-750nm
PUISSANCE MAXIMA: AU-DESSOUS DE 1mW
CONTENTS
79
79
81
76
CAMERA button 77
To select the camera source.
Press again to return to the
previous input source.
78
IEC60825-1
LED-STRAHLUNG
A1;1997
NICHT IN DEN STRAHL BLICKEN
LED KLASSE 2 PRODUKT
WELLENLÄNGE: 425-750nm
MAX AUSGANGSLEISTUNG: UNTER 1mW
74