Usingthe Pcsettings Feature; Setting The Pc Audio - Toshiba REGZA 32RV530U Owner's Manual

@ 32 52RV530U EN.book Page 50 Wednesday, Janu_y 30, 2008 3:54 PM
Usingthe PCsettings feature
You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal, you can
use the PC Settings feature to make adjustments to the image.
If the edges of the picture are cut off, readjust the Horizontal
Position and Vertical Position. If the picture is affected by
interference, readjust the Clock Phase and Sampling
Clock.
To adjust the PC settings:
1
Select PC input mode (_ "Selecting the video input
source to view" page 35).
2 From the Setup menu, highlight PC Settings and press
@.
Note: If a PC is not connected or there is no pc input
signal, this feature will be grayed out in the Setup menu.
3
Press • or • to highlight the item you want to adjust.
4 Press • or • to make the appropriate adjustments.
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of malfunction.
Moves the picture left/right.
Horizontal
The adjustment range is within .+10 from
Position
center.*
Moves the picture up/down.
Vertical
The adjustment range is within .+10 from
Position
center.*
Helps to reduce noise and sharpen the
Clock Phase picture.
The adjustment range is within _+32from
center.*
Helps to reduce noise and minimize periodic
Sampling vertical stripes on the screen.
Clock The adjustment range is within _+5from
center.*
* The default settings and/or adjustment range vary depending on
the input signal format.
Setting the PC Audio
This function allows you to output or mute the sound from
your PC when connecting using the PC IN terminal and an
analog RGB cable.
To set the PC Audio:
1
2
From the Audio menu, highlight Audio Setup and press
@.
Press • or • to select PC Audio and then press • or •
to select No or Yes.
Yes: When viewing the PC input, the audio from the PC
Audio input can be heard.
No: When viewing the PC input, there will be no audio.
Note: Because the PC and HDMI 1 inputs share the same
set of analog audio inputs, the PC Audio menu setting
influences the HDMI 1 Audio menu setting. If PC Audio is
set to "No, "the HDMI 1 Audio setting changes to "Auto."
If PC Audio is set to "Yes," the HDMI 1 Audio setting is
set to "Digital" and is grayed out in the menu. (Also see
item 4 on page 11 and "Setting the HDMI TM audio mode"
on page 32.)
5O
RV530U (E/F) Web 213:276