2. Starting an application
The hydraulics circuit and the turbidity flow cell are installed. The
sample changer SAC950 is installed and fitted with the turntable and the
optional dynamic rinse module (if used). TitraMaster 85 is installed on
the PC.
1. Connect the instruments as shown on paragraph 1.3.
2. Connect the PC to the Titration Workstation or Ion Analyser: please
refer to the TitraMaster 85 Getting Started, part no. D21T052.
3. Switch on the instruments in the following order: Sample changer
SAC950, TPM870, Turbididity meter, workstation.
4. Start TitraMaster 85 on the PC.
5. In the User identification window, detect the workstation connected
to the PC (tick the Detect connected stations box and click OK).
TPM870
20