RECORDING A TV PROGRAM
RECORDING AND VIEWING THE SAME TV PROGRAM
1
To turn on the TV/VCR, press the POWER
button.
POWER
3
Press the SP/SLP button to select the desired
tape speed SP or SLP. The counter and SP or
SLP will appear on the screen about 4 seconds.
SP/SLP
•
NOTES:
If power is switched off during recording, the TV set goes off and the VCR continues to record. Press the
STOP button to halt the recording and turn off the VCR.
•
The TV/VCR Channel cannot be changed during recording.
2
Load a cassette tape with the erase prevention
tab intact.
4
Set the TV/CATV option to the appropriate
position (See page 22).
00 : 00 : 00 SP
3
TV
- VHF/UHF channels
CATV - CABLE TV channels
1
35