Connecting An A/V Receiver - Toshiba 43A61 Owner's Manual

Connecting an A/V receiver

This connection allows you to use an audio/video (A/V) receiver to
enhance your TV's sound.
If you have a system with Dolby Pro Logic* surround sound, you can
add to the realism of the sound by using the TV speakers as center
channel speakers.
You will need:
• one coaxial cable (may be provided by your cable company)
• one pair of audio cables
• one video cable
• one audio cable for the audio center channel
To A/V receiver
Video TV
OUT IN
S-VIDEO
Y
VIDEO
P
B
L/ MONO
AUDIO
P
R
R
COLOR
STREAM
VIDEO 1 VIDEO 2
INPUT
IN DVD IN
Connection example of Dolby Pro Logic surround system
Audio
VCR
Video
Left
speaker
Surround
speaker L
___________
* "Dolby Pro Logic" is a trademark of Dolby Laboratories Licensing Corporation.
12
Center From
OUT Antenna
AUDIO CENTER ANT( 75 )
CHANNEL IN
ANT-1
ON OFF
OUT
ON
OUT
VAR
R L
AUDIO
ANT-2
VIDEO
L/
L
MONO
AUDIO AUDIO
R R
OUT
Video
LDP/DVD
Audio
A/V receiver
T V
Right
speaker
Surround
speaker R
Caution:
To avoid damaging the speakers:
• Turn off the TV before connecting or
disconnecting the Audio Center Channel
cable.
• Do not connect from the A/V receiver's
Center Speaker OUT (amplified signal) to
the TV's Audio Center Channel IN.
Note:
OFF
Refer to the instructions provided with your
A/V receiver for details about your surround
sound system.
When the Audio Center Channel ON/OFF
switch is ON, the TV speakers will function as
center channel speakers only.
To adjust the center channel speaker volume,
use the center level control on the A/V
receiver.
To use the TV speakers as normal speakers,
set the Audio Center Channel ON/OFF switch
to the OFF position.