Learning About The Remote Control - Toshiba Regza 42HL167 Owner's Manual

Learning about the remote control

The buttons used for operating the TV only are described here.
For the CE-Link remote control functions, see the section
"Using CE-Link" (- page 64). For a complete list of the
remote control's functions, see the remote control functional
key chart (- pages 25–26).
1
3
6
8
9
12
15
16
19
20
21
Note: The error message "Not Available" may appear if you
press a key for a function that is not available.
1 SLEEP accesses the sleep timer (
2 POWER turns the TV on and off. When the TV is on, the
green LED indicator on the TV front will be illuminated.
24
Chapter 3: Using the remote control
3
4
5
2
6
7
4
8
9
5
10 3 C / # c While watching TV, these buttons open the
7
11 Arrow buttons (BbC c) When a menu is on-screen,
10
11
13
12 VOL + - adjusts the volume level.
13 CH Bb cycles through programmed channels when no
14
17
18
14 EXIT closes on-screen menus.
15 INFO displays TV status information as well as program
16 MUTE reduces or turns off the sound (- page 55).
17 CH RTN returns to the last viewed channel or source (-
22
18 RECALL displays TV status information (- page 66).
19 C.CAPTION (TV/VCR) opens the closed caption/audio
20 PIC MODE selects the picture mode (- page 53).
21 FREEZE freezes the picture. Press again to restore the
- page 64).
22 PIC SIZE cycles through the picture sizes: Natural,
MODE SELECT sets the four remote control device
modes: TV, CABLE/SAT, DVD, and VCR/PVR. Press
TV until the keypad blinks 3 times to control the TV.
The selected MODE key blinks each time any key is
pressed. ( - page 27). When the Auto Input feature is set,
these keys can also be used to change inputs on the TV
(- page 41).
Channel Numbers (0–9, –/100) directly tune
channels. The = button is used to tune digital channels
-
( page 49) or to edit the Favorite List (
INPUT selects the video input source (
FAV BROWSER accesses the Favorites List in the
Channel Browser ™ ( - page 47).
MENU accesses the main TV menu system (
and 37).
ENTER activates highlighted items in the main menu
system.
THINC accesses the THINC menu (
Channel Browser ™ and tune to the previous/next channel
in the channel history (- page 48). (Also see "Arrow
buttons.")
these buttons select or adjust programming menus. (Also
see 3 C / # c.)
menu is on-screen ( - page 40).
details, when available (- page 66).
page 49).
selector screen. (The audio selector is not available for
analog channels.) (- page 55.) By using this button, it is
also possible to select TV mode and view one program
while another is being recorded.
moving picture.
TheaterWide 1/2/3, Full, 4:3 HD, and Native
-
( page 53).
-
page 47).
- page 46).
-
pages 36
- page 37).