Chapter 6: Using The Tv's Features; Selecting The Video Input Source To View - Toshiba Regza 40RF350U Owner's Manual

Selecting the video input source
to view
To select the video input source to view:
Press + on the remote control or TV control panel.
1
2
And then either:
a) Press 0–8; or
b) Repeatedly press Bb on the remote control and then
press T to change the input; or
c) Repeatedly press + on the remote control or TV
control panel to change the input.
The current signal source displays in the top right corner
of the Input Selection screen.
Input Selection
0 ANT ANT
1 Video 1
2 Video 2
3
ColorStream HD1
4
ColorStream HD2
5 HDMI 1 CE-LINK
CE-Link
6
HDMI 2
7 HDMI 3
8 PC
0 - 8 / INPUT
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(- "Labeling the video input sources" at right).
• Sources can also be "hidden" (- "Labeling the video input
sources" at right).
• "No Video Signal" will appear randomly on the screen if no
signal is received in video input mode.
• If a CEC device is connected to an HDMI input, the CE-Link
icon will appear.
If a CE-Link device with HDMI switching capability
(e.g. Audio Receiver) is connected to the HDMI input:
Press + on the remote or TV control panel repeatedly to
highlight HDMI 1, HDMI 2, or HDMI 3.
If the connected CEC device has any connected devices, a
separate device selection popup window will appear.
Input Selection
0
ANT ANT
1 Video 1
2 Video 2
3 ColorStream HD1
4 ColorStream HD2
HDMI 1
5 CE-Link
6 HDMI 2
7
HDMI 3
8
PC
0 - 8 / INPUT to Select
Navigate
Press + repeatedly to highlight the desired input source, and
then press O.
46

Chapter 6: Using the TV's features

ANT
to Select Navigate
HDMI 1
HDMI 1 - 1 Audio Receiver
HDMI 1 - 2 Player
HDMI 1 - 3 Recorder
Note:
• When selecting CE-Link input sources from the popup
window using +, some CE-Link devices may automatically
turn on.
• When selecting input sources using B b, you will have to
press T to actually select a particular device from the
popup window.
To switch the video input source using the mode select
buttons:
Press CABLE/SAT, DVD, or VCR/PVR.
Note: To use this function, you must set up the Auto Input
feature (- page 41).