Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
5
10
15
Pin No.
Signal name
1
R
2
G
3
B
4
NC (not
connected)
5
NC
6
Ground
7
Ground
8
Ground
Using the PC setting
• In the PC input mode, you cannot select the Color, Tint,
Sharpness, Black stretch, MPEG NR and DNR in the
Picture setting menu and Cinema mode (- page 16).
• In the PC input mode, the Manual setting (- page 19) is
not displayed.
• First press o until the video input mode list appears on the
screen, then press u or U and Q in order to select the PC
input mode (- page 19).
• This function may not be available for some signal or if no
signal is received.
• The optimum points of the clock phase and sampling clock
adjustments may be incomprehensible according to the
input signals.
Adjusting the picture size/position
1
Press M, then press I or i to display the SET UP menu.
Language
AV connection
PC Setting
MENU
Back
EXIT
2
Press u or U to select PC Setting.
Language
AV connection
PC Setting
MENU
Back
EXIT
Connecting your TV
1
6
11
Pin No.
Signal name
9
NC
10
Ground
11
NC
12
NC
13
H-sync
14
V-sync
15
NC
SET UP
English
OK
OK
Watch TV
SET UP
English
OK
OK
Watch TV
3
Press Q to display the PC Setting menu.
PC Setting
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
MENU
Back
EXIT
4
Press u or U to select an option you want to adjust. Press
I or i to adjust the settings as required.
Horizontal position
Adjusting the clock phase of the picture
If the clock phase, which synchronize the PC signal and LCD
display, is not optimized, the picture will blur.
This function enables you to adjust clock phase and display a
clear picture.
1
From the PC Setting menu, press u or U to select Clock
phase.
2
Press I or i to obtain a clear picture.
Clock phase
Adjusting the sampling clock
If the sampling clock does not match with the dot clock
frequency of the PC, blurred picture detail will occur, or screen
width will change, or drift patterns in vertical lines may be
apparent.
This function enables you to adjust it and optimize the picture.
1
From the PC Setting menu, press u or U to select
Sampling clock.
2
Press I or i to optimize the picture.
Sampling clock
Resetting the PC setting
The Reset function adjusts the PC Setting to the factory
settings.
1
From the PC Setting menu, press u or U to select Reset
on the 2nd page.
PC Setting
Reset
MENU
EXIT
Back
2
Press Q.
1/2
0
0
0
0
0
0
Watch TV
0
0
0
2/2
OK
0
Watch TV
25