Activating The Black Stretch; Activating The Mpeg Nr (Noise Reduction); Activating The Dnr (Digital Noise Reduction); Selecting The Color Temperature - Toshiba 37A3000A Owner's Manual

Activating the black stretch

This function increases the strength of dark areas of the picture
which improves definition.
1
Press M, then press I or i to display the PICTURE menu.
PICTURE
Picture settings
3D Color management
Base color adjustment
Cinema mode
MENU Back EXIT
2
Press u or U to select the Picture settings menu, then
press Q.
3
Press u or U to select Black stretch on the 2nd page.
Picture settings
Black stretch
MPEG NR
DNR
Color Temperature
MENU Back EXIT
4
Press I or i to select On or Off.
Black stretch
Note:
In the PC input mode (- page 19), this mode is not available.

Activating the MPEG NR (Noise Reduction)

If the receiving signal of MPEG is a mosquito (grained) noise
depending on the compression and conversion, the noise may
be reduced when using this function.
1
From the Picture settings menu, press u or U to select
MPEG NR on the 2nd page.
2
Press I or i to select Off, Low, Middle or High.
MPEG NR
Note:
In the PC input mode (- page 19), this mode is not available.
Activating the DNR (Digital Noise
Reduction)
If the receiving signal is weak and the picture is blurry, the
picture may be improved when using this function.
1
From the Picture settings menu, press u or U to select
DNR on the 2nd page.
2
Press I or i to select Auto, Off, Low, Middle or High.
DNR
Note:
This function is available for 480i and 576i signals.

Selecting the color temperature

You can change the tone of the picture by selecting from three
preset color temperatures: Cool, Normal or Warm.
1
From the Picture settings menu, press u or U to select
Color Temperature on the 2nd page.
16
Using the TV's features
OK
Off
On
Watch TV
2/2
On
Low
Auto
Cool
Watch TV
On
Low
Auto
2
Press I or i to select mode you prefer.
Color Temperature
Cool: Lends a blue hue to the picture.
Normal: Neutral
Warm: Lends a red hue to the picture.

Adjusting the color management

You can adjust the picture color quality by selecting from 6
base color adjustments : Red, Green, Blue, Yellow,
Magenta or Cyan.
1
From the PICTURE menu, press u or U to select 3D
Color management.
2
Press I or i, then press I or i to select On.
3D Color management
3
Press Q, then press u or U to select Base color
adjustment.
4
Press Q, then press u or U to select an item you want to
adjust.
5
Press i, then press I or i to select Hue, Saturation or
Brightness.
Base color adjustment
Hue
Red 0
Green 0
Blue 0
Yellow 0
Magenta 0
Cyan 0
Reset
MENU EXIT
Back
6
Press u or U to adjust the settings as required.
Hue
Red 0
Notes:
• If you select color management Off mode, this mode is not
available.
• In the PC input mode (- page 19), this mode is not
available.

Resetting the base color adjustment

The Reset function adjusts the base color adjustment to the
factory settings.
1
From the Base color adjustment menu, press u or U
to select Reset.
2
Press Q.

Using the cinema mode

A movie film's picture runs at 24 frames a second, whereas
movie software such as DVD, etc., that you enjoy watching on
television at home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a smooth motion
and picture quality, select the On mode.
Effective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i and 576i signals.
Cool
On
Saturation Brightness
0 0
0 0
0 0
0 0
0 0
0 0
OK
Watch TV
Saturation Brightness
0 0