Toshiba 19AV500U Owner's Manual page 19

To use a PC, set the monitor output resolution on the PC
•
before connecting it to the TV. The following signals can
be displayed:
Format Resolution
VGA 640 × 480
SVGA 800 × 600
XGA 1024 × 768
WXGA 1280 × 768
WXGA 1360 × 768
Other formats or non-standard signals will not be displayed
correctly.
To display the optimum picture, use the PC setting feature
•
( "Using the PC settings feature" on page 40).
Note:
• The PC audio input terminals on the TV are shared with the
HDMI analog audio input terminals ( page 41).
• Some PC models cannot be connected to this TV.
• An adapter is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD's title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
Signal names for mini D-sub 15-pin connector
•
Signal
Pin No. Pin No.
name
1 R 6
2 G 7
3 B 8
4 NC* 9
5 NC 10
*NC=Not connected
• If connecting a certain PC model that signal is particular,
the PC signal may not be detected correctly.
Chapter 2: Connecting your TV
V. Frequency
60Hz
60Hz
60Hz
60Hz
60Hz
Signal Signal
Pin No.
name name
Ground 11 NC
Ground 12 NC
Ground 13 H-sync
NC 14 V-sync
Ground 15 NC
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the TV, use
an HDMI-to DVI adapter cable and analog audio cables (
PC AUDIO IN port just shared with DVI signal from HDMI
port only). If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analog cables are
not necessary ( page 17).
Computer
The HDMI input can accept and display VGA, SVGA, XGA,
480i (60Hz), 480p (60Hz), 720p (60Hz), and 1080i (60Hz)
signal formats. For detailed signal specifications, see page 49.
Note:
• The edges of the images may be hidden.
• If connecting a certain PC model that signal is particular,
the PC signal may not be detected correctly.
PC audio output
19