Triggerdelay; Output Port Function; Line Source; User Output - Omron STC-MBCM200U3V Product Specifications And User's Manual

As mentioned in the previous chapter, "Image acquisition and Camera Mode", each trigger can add to the
duration of the input signal
This Trigger Delay can add to the duration per
GenICam Parameters

TriggerDelay

8.2

Output Port Function

This function sets the Output to Line Mode, and then the Line is assigned as the output.
The following functions can be assigned when the IO port is used as the output signal port.
The following list shows the configurable functions available through the Line Source.
The function that describes as "Enable" on "Changeable Polarity" is the configurable polarity on the Line Inverter
(true, false).
No.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
1) Off (Disable)
Disable the output signal.
2) User Output (General Output)
High or Low level signal that sets on the software is output.
3) Trigger Out
The trigger signal that added "Trigger Out Delay (Output pulse delay time)" and "Trigger Out On Time
(Output pulse width)" is output.
4) Trigger Through Out
The trigger input signal is output. (with a slight internal delay)
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use's Guide
Integer Type Trigger Delay
Range: 0 to 262,143 μseconds, Default: 0 μsecond
Function Name
Off (Default)

User Output

Trigger Out
Trigger Through Out
Exposure End Out
Frame End Out
Frame Trigger Wait
Transfer End Out
Strobe Out
Exposure Active
.
μsecond
Changeable
Polarity
-
-
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
No.13S076-08
34/62