Auto-Configure/To Reset - Toshiba 15VL56B Owner's Manual

• The Auto-configure function allows you to automatically adjust the screen position, clock, and phase.
• The reset function allows you to return to the picture settings programmed at the factory.

Auto-configure/To reset

CALL
1
4
7
MENU
Note:
Some graphic boards' signals may not
display properly. If the results are
unsatisfactory, adjust your monitor's
position, clock and phase manually.
#01E29-33_1520VL56BG
Black
2 3
5 6
8 9
0
EXIT
P
OK
P
33
To configure automatically:
Press the MENU button, then press the or button to
display the PC menu.
Press the OK button, then press
the z or y button to select
Auto-configure.
Press the OK button. The automatic adjustment will start.
Note:
The displayed image will disappear for a few seconds while Auto
configuration is in progress.
To reset the PC setting:
Press the MENU button, then press the or button to
display the PC menu.
Press the OK button, then press
the z or y button to select
Reset.
Press the OK button.
05.6.24, 0:53 PM
PC
H-Position
V-Position
Clock
To set
Phase
Auto-configure
Reset
OK MENU EXIT
PC
H-Position
V-Position
Clock
To set
Phase
Auto-configure
Reset
OK MENU EXIT
33
Toshiba 1520VL56BG (E)