Hardware Migration; Introduction - Siemens MC35 Migration Manual

Migration from MC35 to MC35i
P R E L I M I N A R Y

4 Hardware migration

This chapter contains information about the hardware design, installation instructions as well
as physical properties for both modules. Hardware features are listed in comparison tables
related to power supply, RF, audio, SIM and serial interfaces with functionality descriptions.
All features, except RF, are available through common host application interface.
4.1

Introduction

MC35i incorporates almost all of the MC35 features like EGSM 900MHz, DCS 1800MHz and
fast GPRS technology with following additional features:
æ Autobauding up to 230kBaud
æ Single side mounted
æ Two additional Sleep Modes
MC35i is super-slim, single-side mounted, compact, dual-band GSM/GPRS OEM module for
integration into industrial or mobile devices. Designed to easily provide radio connection for
voice and data transmission it integrates seamlessly with a wide range of GSM/GPRS
application platforms and is ideally suited to design and set up innovative cellular solutions
with minimum effort.
MC35i and MC35 are supporting GPRS multi-slot class 8 (4 Rx, 1 Tx time-slot) and the
GPRS coding schemes CS-1, CS-2, CS-3 and CS-4. Modules operate in GSM 900MHz and
GSM 1800MHz frequency bands.
9 of 30 12.03.03
Migration from MC35 to MC35i