Marking Desired Scenes - Toshiba SD-V593SU Owner's Manual

Marking desired scenes

The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
Marking the scenes
DVD
VCD
1
Press MARKER during playback.
2 Select the blank Marker using C or D.
Then press ENTER at the desired scene.
• Repeat this procedure to set the
other 2 scenes.
3 Press MARKER to remove this display.
Notes:
•
Some discs may not work with the marking operation.
•
The marking is cancelled when you open the disc tray or
turn the power off.
•
Some subtitles recorded around the marker may fail to
appear.
2F90201A (E)p49-52
Marker 1
Marker 2
Marker 3
/Enter/Clear/Marker
Marker 1 00 27 54
Marker 2
Marker 3
/Enter/Clear/Marker
49
Returning to the scenes
DVD
VCD
1
Press MARKER during playback or stop mode.
Marker 1
Marker 2
Marker 3
2 Press C or D to select the Marker 1-3.
Marker 1
Marker 2
Marker 3
Press ENTER.
3
Playback starts from the marked
scene.
To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
4/4/05, 9:03 PM
C/D
ENTER
CLEAR
MARKER
00 27 54
01 16 25
02 08 31
/Enter/Clear/Marker
00 27 54
01 16 25
02 08 31
/Enter/Clear/Marker
49