Spätná montáž ventilátora
procesora
VÝSTRAHA: Pred prácou vo vnútri počítača si prečítajte bezpečnostné
pokyny, ktoré ste dostali s vaším počítačom, a postupujte podľa krokov
uvedených v časti
počítača dodržujte pokyny uvedené v časti
Ďalšie bezpečnostné overené postupy nájdete na domovskej stránke
zákonných požiadaviek na adrese www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the processor fan with the screw holes on the heat
sink.
2
Replace the four screws (M6xL10) that secure the processor fan to the heat
sink.
3
Connect the processor-fan cable to the system board.
4
Rotate the side-chassis towards the computer until it snaps into place.
Post-requisites
1
Replace the
front
2
Replace the
computer
Pred prácou vo vnútri
bezel.
cover.
počítača. Po práci vo vnútri
Po práci vo vnútri
počítača.
61