Spätná montáž modulu spínača
napájania
VÝSTRAHA: Pred prácou vo vnútri počítača si prečítajte bezpečnostné
pokyny, ktoré ste dostali s vaším počítačom, a postupujte podľa krokov
uvedených v časti
počítača dodržujte pokyny uvedené v časti
Ďalšie bezpečnostné overené postupy nájdete na domovskej stránke
zákonných požiadaviek na adrese www.dell.com/regulatory_compliance.
Procedure
1
Route the power-button board cable through the slot on the front panel.
2
Align and snap the power-button module into the slot on the front panel.
3
Connect the power-button board cable to the system board.
4
Rotate the side-chassis towards the computer until it snaps into place.
Post-requisites
1
Replace the
front
2
Replace the
computer
Pred prácou vo vnútri
bezel.
cover.
počítača. Po práci vo vnútri
Po práci vo vnútri
počítača.
57