Manual Clock Setting - Toshiba MW24FP3 Owner's Manual

Manual clock setting

You must set the date and time manually for timer recordings,
ON/OFF timer and daylight saving time if the auto clock
process did not set them correctly.
EXAMPLE: Setting the clock to "8:30 AM", 27th. (SAT)
March, 2004.
1
Press MENU, then press
option.
MENU
ENTER
SETUP
2
Press or to select "CLOCK SET", then
press .
ENTER
3 Press or to set the month, then press .
ENTER
4 Set the day, year and time as in step 4, then
press ENTER.
ENTER
5
After setting the clock, date and time starts
functioning automatically.
To make corrections any time during the process
Press or repeatedly until the item you want to
change blinks, then set the item again.
5L00301C [E]p18-21
or to select
CLOCK SET
ON/OFF TIMER
AUTO CLOCK ON
STANDARD TIME
DAYLIGHT
SAVING TIME
/ / / / MENU
CLOCK SET
ON/OFF TIMER
AUTO CLOCK ON
STANDARD TIME
DAYLIGHT
SAVING TIME
/ / / MENU
CLOCK SET
MONTH 3
DAY 1(MON)
YEAR 2004
TIME 12:00AM
/ / / / ENTER/MENU
CLOCK SET
MONTH 3
DAY 27(SAT)
YEAR 2004
TIME 8:30AM
/ / / / ENTER/MENU
21
Notes:
• After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
• When you set the minute, you can change in 10-minutes step
by holding down or .
20/4/04, 16:13
MENU
ENTER
21