Canon imageFORMULA DR-S150 User Manual page 81

Item Description
Register a new community. Click to open a
dialog box for editing the various settings for a
New
community.
Up to three communities can be registered.
Change the settings of the selected community.
Modify Click to open a dialog box for editing the
various settings for a community.
Delete Delete the selected community.
Display the settings of the selected community.
Detail info Click to open a dialog box for browsing the
various settings for community.
Edit dialog box of community
Clicking [New] or [Modify] in the community settings screen opens the
following page.
Item Description
Set a community name within 32
characters.
You can use single-byte letters,
Community numbers, hyphens, and underbars.
name An error appears when you press
the [Apply] button if the name is
already being used or contains
illegal characters.
MIB access Set either [Read/Write] or [Read
restrict only] as the user rights.
Sets permission to access the
host.
All hosts: Permits access to all
Host filtering hosts.
Listed hosts: Permits access only
to hosts specified in [Accepted
hosts list].
To specify a host to be accessed,
input its IP address or computer
Accepted
name. You can specify a maximum
hosts list
of 5. You can input up to 64
characters in each line.
Trap setting Select ON/OFF for trap setting.
To specify a host to be targeted for
trap setting, input its IP address or
Trap
computer name. You can specify a
destinations
maximum of 5. You can input up to
64 characters in each line.
81
Default Value
None
Read only
All hosts
None
ON
None