Detecting A Document Double Feed - Canon imageFORMULA DR-S150 User Manual

5
Click the [OK] button to close the settings screen.
Hint
When you set the Long mode, [(Long Document)] will be
displayed in [Page Size] in the [Basic] tab.
IMPORTANT
When scanning documents with [Long Document Mode (3000 mm)]
selected on the [Long Document Mode] tab, the image may not be
scanned completely if 400 dpi or 600 dpi is selected, or if [Color] is
selected for [Color mode] and [Duplex] is selected for [Scanning
Side]. If this happens, select a lower dpi, or select [Monochrome] for
[Color mode] or [Simplex] for [Scanning Side] and scan the
document.

Detecting a document double feed

This scanner includes a function to detect document double feeds. By
using this function, the scanner will automatically stop when it detects
that multiple documents have been fed at the same time. You can also
specify whether to save the scanned image after scanning has
finished and continue scanning the document (double feed detection
ignore function).
To use the double feed detection function, you must first open the
scanner driver settings screen and enable double feed detection. It is
also necessary to set [Rapid recovery system] to use the double feed
detection ignore function.
Setting procedure
1
Open the scanner driver's Detail Settings screen.
p. 60)
2
Click the [Error Detection] tab.
34
(See