Connections; Connecting To A Tv; Connecting To A Tv (Using The Phono Type Jacks)11 - Toshiba SD-890KY Owner's Manual

Connections

Connecting to a TV

Connect the DVD player to your TV.
Connecting to a TV (Using the phono type jacks)
Normal TV
To audio
input
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video
selector, the playback picture may be distorted as DVDs are copy protected.
• Analogue audio out will not have sound if DTS playback is selected.
To video
input
(yellow)
Audio/Video cables (supplied)
To 2ch AUDIO OUT
To VIDEO
(R: red, L: white)
OUT
(yellow)
• Make the following setting.
On-screen display
"Digital Output"
"Video Output"
Page
Select:
"Off",
34
"PCM" or
"Bitstream"
Component
34
P-Scan
HDMI
11