Getting Started With The Configtool; Installing The Configtool Ip Utility - Honeywell Performance HDZP252DI User Manual

Getting Started with the ConfigTool

This chapter contains the following sections:
•
•
•
•
•

Installing the ConfigTool IP Utility

Before you can start using your camera, you must install the ConfigTool IP utility on your PC.
1.
2.
3.
4.
5.
6.
Installing the ConfigTool IP Utility, page 13
Discovering Your Device on the Network, page 14
Assigning a New IP Address to Your Device, page 14
Upgrading the Device's Firmware, page 15
Opening a Web Client, page 18
Insert the software CD that came with your camera into your PC's disk drive.
Open the Honeywell Config Tool folder, and then double-click Honeywell ConfigTool.exe.
Click Next on the ConfigTool welcome screen.
Read the User License Agreement. If you agree, select I agree.
If you want, you can change the installation directory (by default, ConfigTool will be installed
in C:\Program Files). To proceed with the installation, click Install.
If the installation is successful, the message Installation is complete! appears.
Click Enjoy Now to open ConfigTool.
2
2
800-22757 - A - 02/2017