Table of Contents
Advertisement
As an alternative to Auto Tuning, the TV can be tuned-in manually using Manual Tuning. For example: if
the television cannot be connected to a video/decoder with a Scart lead or to tune-in a station on another
System (see page 7).
Use S and R to move across the screen and select any of these Manual Tune options.
Programme
Programme: The number to be pressed on the remote control.
System: Specific to certain areas. See page 7.
Search: Search up and down for a signal.
Programme skip: * means nothing has been stored or the facility to skip the channel is ON. See page 9.
Channel: The channel number on which a station is being broadcast.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 10.
Station Name: Station identification. Use the P or Q and S or R buttons to enter up to seven characters.
To allocate a programme position on the television for a decoder and VCR: turn the decoder on, insert a
Press MENU and using S or R select the Set up
1
menu, with Q highlight Manual tuning, press R
to select.
Set up
Language
Country
Auto Tuning
Manual Tuning
Programme Sorting
Teletext Mode
EXIT To Exit
fe
Select
Use P or Q to highlight the programme position
2
required e.g. we suggest Prog. 0 for a video.
Manual tune
System
Search
Programme skip/
pre-recorded tape in the video and press PLAY, then manually tune.
z
x
English
z
x
GB
x
x
x
z
List
x
z x
Adjust
Manual fine
Channel
tuning
Manual Tuning
Prog.
Channel
f
0
1
2
3
4
5
*
e
EXIT Watch TV
MENU Previous
OK Change
Press OK to select.
3
Press R to select System and use P or Q to
4
change (if required, see page 7).
Manual Tuning
System
f
z
0
I
e
EXIT Watch TV
MENU Previous
OK Store
8
Station Name
Station
60
VCR
22
BBC1
28
BBC2
25
ITV
32
CH4
69
Select
fe
Change
z x
60
0
VCR
x
z x
Select
fe
Adjust
Continues on the next page
Advertisement
Table of Contents
