Programming Channel Memory; Tv/Cable Function; Ch Program Function - Toshiba 27A50 Owner's Manual

Programming Channel Memory

The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL L or M button.
First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area.
If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.
CHANNEL t/s
MENU TV / VIDEO VOLUME CHANNEL
MENU
T/S t/s
POWER
RECALL MUTE
o
1 3
2
4
5 6
7 8 9
CH RTN
100 0
ENT
CH
T/S
MENU/
VOL VOL
ENTER
CH
MENU
TV
CABLE
VCR
EXIT
FAV CH TV/VIDEO
A
REC TV/VCR STOP PLAY
STILL SOURCE PIP
SLOW PAUSE REW
FF
PIP CH LOCATE SWAP
16

TV/CABLE function

1
Press MENU until the Setup menu is
displayed on the screen.
2
Press s or t until "TV/CABLE" is
displayed in purple.
POWER
3
Press T or S until the mode that corre-
sponds to your TV signal system is dis-
played in purple.
TV: TV broadcast signals.
(VHF channels 2 through 13 and UHF
channels 14 through 69)
CABLE: Cable TV signals.
(Cable channels 1 through 125)

CH PROGRAM function

1
Press MENU until the Setup menu is
Channel
displayed on the screen.
Number
2
Press s or t repeatedly until "CH PRO-
GRAM" is displayed in purple.
3
Press T or S to start channel programming.
s/t
CHANNEL The TV will automatically cycle through all
the TV or CABLE channels depending on
s/t
the mode selected, and store active channels
in the channel memory.
4
When channel programming is complete,
you will see the message at the right.
5
Press CHANNEL s or t to make sure the channel programming has
been done properly.
TIMER: 0 MIN
TV/CABLE: [TV]CABLE
CH PROGRAM
ADD/ERASE: [ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER: 0 MIN
TV/CABLE: TV[CABLE]
CH PROGRAM
ADD/ERASE: [ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER: 0 MIN
TV/CABLE: TV[CABLE]
CH PROGRAM
ADD/ERASE: [ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] START[T S]
CH PROGRAM
CABLE 24
CH PROGRAMMING
COMPLETED
CABLE 4